Safety 1st 44301A Guia Del Usuario página 6

Using Your Tubside Bath Seat
To Use Bath Seat:
1. Fill tub using a minimum of water
and check water temperature
before putting child in seat.
WARNING:
Babies can drown in as little as
one inch of water. ALWAYS
bathe your infant using as little
water as necessary.
2. With bath seat attached to the
tub, carefully lower your child into
the seat.
3. As your child sits down, his or her
weight will depress the Passive
Restraint Seat which decreases the
size of the leg openings for added
security.
TIP: For baby's hard to reach spots,
you may wish to use the swivel seat
option.
To Clean:
1. After draining the tub, pull the
Clamp Handle towards you, grasp
the Seat, and lift the Bath Seat
from the tub.
2. Rinse the Bath Seat thoroughly
with fresh water. Allow excess
water to drain and towel dry.
6
1
Leg Openings
1
Handle