GYS STARTPACK 12.24 Manual De Instrucciones página 12

Ocultar thumbs Ver también para STARTPACK 12.24:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Translation of the original instructions
STARTPACK
vehicle, and the red light is off.
5
Orange and green lights are
flashing after 24h or charge.
1
Orange and green lights flash al-
ternatively during the charge.
2
The orange led flashes for more
than 3hours and does not turn to
green.
3
Startpack is plugged in to the
mains but no light is on.
4
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
12
STARTPACK 12.24
cannot
start
the
Internal batteries voltage is really
low. They can be damaged.
The fuse has blown.
Batteries damaged, no voltage
despite the charge.
Thermal protection of the charger. Charger is overheating because
The battery is sulphated or deeply
discharged.
No voltage from the mains.
The fuse has blown.
The voltage connector is not plug-
ged on the 12V socket.
Put the STARTPACK on recharge
to attempt recovery of internal
batteries.
Replace the fuse.
Unplug the product from the main
and plug it again to start a new
charge. If the problem appears
again the batteries are damaged.
the temperature is too high. The
charger will restart the charge au-
tomatically as soon as the tempe-
rature dropped down sufficiently.
Normal process of the Startpack:
the charger detects the presence
of sulphated / deeply discharged
batteries. It will attempt to re-
cover the battery with a specific
charge of 16h.
Check the presence of 230V vol-
tage on the supply.
Replace the fuse.
Plug the voltazge connector on
the 12V socket.
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

026285

Tabla de contenido