[Sharpness]
1) Press ▲▼ to select [Sharpness].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation
Adjustment
The sharpness
Press ▶ .
increases.
The sharpness
Press ◀ .
decreases.
[Gamma]
1) Press ▲▼ to select [Gamma].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation
Adjustment
Brightens the
Press ▶ .
intermediate
gradations.
Darkens the
Press ◀ .
intermediate
gradations.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
[Noise reduction]
Reduces noise when viewing old video or other
images affected by noise.
1) Press ▲▼ to select [Noise reduction].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
z
z The setting will change as follows each time
Range
Maximum
[Progressive]
value 31
Minimum
Can be set for video input signals of 480i, 576i, 1035i,
value 0
and 1080i.
1) Press ▲▼ to select [Progressive].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
z
z The setting will change as follows each time
[Off]
z
z Set to [Off] when video with a lot of movement
z
z [Film] enables playback of 3-2 pull down/2-2
Range
z
z When switching, the image will distort for a
Maximum
value 15
[Reset]
Minimum
The setting returns to its value before adjustment.
value 0
1) Press ▲▼ to select [Reset].
2) Press the <SELECT> button or ▶ .
3) Select [Yes], and press the <SELECT>
button.
z
z The setting returns to its value before
z
z Select [No] and press the <SELECT> button to
[Image adjust] menu
you press the button.
[Off]
you press the button.
[On]
is affected by flickers or horizontal lines.
pull down images on the projector without loss
of picture quality in the images.
moment.
adjustment.
return to the sub menu.
[On]
[Film]
ENGLISH - 53