[Pc Adjust] Menu; [Auto Pc Adj.]; [Fine Sync]; [Total Dots] - Christie LX1750 Manual Del Usuario

[PC adjust] menu

[PC adjust] menu
Select [PC adjust] from the main menu on the
menu screen, and select the item from the sub
menu.
For operation of the menu screen, refer to
"Navigating through menu" (
z After selecting the item, press ▲▼◀▶ to make
the setting.
Remote control

[Auto PC adj.]

Automatically adjusts synchronization, total number of
dots, horizontal shift, and vertical shift.
1) Press ▲▼ to select [Auto PC adj.].
2) Press the <SELECT> button.
z
z This executes automatic adjustment.
Note
z You can also use [Auto PC adj.] by pressing the
<AUTO PC> button on the remote control.
z Some computers will be unable to adjust any of
[Fine sync], [Total dots], [Position H] or [Position V].
In this case, adjust manually and register in [Store].
z After registering the automatically adjusted settings,
you can select that mode using [System] in the
[Input] menu.
z The automatic PC adjustment function does not
work when any of [480p], [576p], [720p], [480i],
[576i], [1035i], [1080i], or [1080p] have been
selected using [System] in the [Input] menu.
z With some computers and types of signal, it may
not be possible to project the images correctly.
46 - ENGLISH
page 40).

Control panel

[Fine sync]

Adjusts the projector when there is flicker due to a
tracking (synchronization) mismatch.
1) Press ▲▼ to select [Fine sync].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
z
z Press the <SELECT> button to return to the
sub menu.
Note
z The adjustment value can be set from 0 to 31.
z For some computers, it may not be possible to
completely eliminate the screen flicker.

[Total dots]

Adjusts total number of dots in the horizontal interval.
1) Press ▲▼ to select [Total dots].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
z
z Press the <SELECT> button to return to the
sub menu.

[Position H]

Adjusts the horizontal position of the screen.
1) Press ▲▼ to select [Position H].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
z
z Press the <SELECT> button to return to the
sub menu.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)