BaByliss PRO BAB6910E Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
ENGLISH
BaBylissPRO® IONIC
PORTABLE HOOD DRYER
BAB6910E
This very compact table dryer is
perfect for hairstylists who want
to offer their services at home.
Easy to carry and foldable, thus
easy to store, the hood is very
large for comfort, even with large
rollers. the airflow is adjustable.
as soon as the hair is styled, it only
takes a few seconds to fold the
dryer and store it away after it has
cooled down.
HIGH PERFORMANCE
& IONIC TECHNOLOGY
Hair is naturally positively charged;
this positive charge is increased
during drying and generates static
electricity that causes the scales of
the hair to move away from each
other. The surface of your hair thus
becomes rough and takes on a
lifeless appearance. The negative
ions generated by the hairdryer
will neutralise the positive charge
and in this way remove any static
electricity in the hair. The hair cuti-
cles thus properly closed, the hair
is shiny, easy to style.
It has also been proven that ionic
technology acts as a catalyst for
hair products.
OPENING AND ADJUSTMENT
OF THE HOOD
Place the hood dryer on a table
before opening it. Facing the
front of the dryer, release the front
hood latch (1) by bending the latch
slightly toward you. Lift the hood
and stem up and forward by the
handle (2) until the stem is in the
maximum forward position. Then
tilt the hood back slightly until it
snaps into place under the hood
lock.
Height adjustment: tilt the hood
and stem right back and lift the ex-
tendable neck (4) to adjust height.
Once satisfied that the extenda-
ble neck (4) is the correct height,
carefully allow the hood and stem
to tilt forward to maintain height
adjustment.
USE
Prepare the hair for drying e.g. in
rollers, lightly towel dried, etc.
Ensure that the power switch (5)
is in «off» position (0) and plug
in. Switch to either I (low) or II
(high). Use position II for thick or
long hair or for starting the drying
process, and position I for normal
drying or for perfectly safe drying
of damaged hair or synthetic hair
extensions.
As a general rule, it is recommend-
ed to start in position II and end
drying in position I.
Adjust the vents so that there is
more or less air on the top, front or
back of the head, as your hairstyle
requires.
Rotating the handle to left or right
5

Publicidad

Tabla de contenido
loading

Tabla de contenido