BaByliss PRO BAB6910E Manual Del Usuario página 6

opens or closes vents (6) that af-
fect the distribution of air flow
inside the hood.
TO CLOSE THE HOOD
Turn the switch to «off». Unplug
the appliance and store the cord
in its compartment in the hood
dryer base (7).
Being careful to support the hood,
push the hood lock downwards to
release the
hood. Fold the hood. Ensure that
it is fully closed (check that it is
engaged under the rear latch and
that it has fully clicked under the
front latch)) before lifting it by the
handle.
MAINTENANCE
To clean the hood dryer, use a
damp cloth with mild detergent.
Always ensure that the dryer is ful-
ly dry before use.
IMPORTANT
The hairdryer is equipped with a
safety thermostat. In case of over-
heating, it stops automatically.
After a short time, it starts again.
However, before continuing,
check that the air vents (on the top
of the hood and on the base) are
clean and unobstructed. Clean out
as necessary before continuing.
6