Making A Call With The Jabra Bt200 - Jabra BT200 Manual Del Usuario

Connecting the multi-adapter to your phone
The multi-adapter needs to be connected to your phone. To enjoy cordless
communication with the JABRA BT200 simply:
1. Locate the headset socket on your phone.
2. Plug in the jack from the multi-adapter.

Making a Call with the JABRA BT200

a) Making a Call from the Mobile Phone
1. Ensure that your headset is in standby mode by removing it from the multi-adapter.
2. Place the headset on your ear in the desired wearing style.
3. Press the multi-function button on the headset – this puts the headset into active mode
and will establish a link between the multi-adapter and the headset. (The indicator
lights will flash every 3 seconds – you may also hear background noise as well.)
4. Using the phone's keypad, dial the phone number.
5. To start the call, press the phone's SEND / CALL key – the phone initiates the call.
6. The call will then transfer automatically to the headset when connection is made.
16
b) Making a Call Using Voice Dialing
1. Place the headset in the desired wearing style.
2. On the Headset - Press the Multi Function Button.
3. A short tone will prompt you to say the name of the person you wish to call (as entered
in the phone's voicedial phonebook directory). Speak the voice 'tag' name.
4. The phone automatically dials your selection, and you see the details of the call
on the phone screen.
5. When connected you are free to communicate normally via the headset.
(Note : Please refer to the phone user guide for instructions on storing voice tags.)
c) Making a Call Using Voice Dialing
If your mobile phone supports voice dialing, you can use this feature with the headset.
(Voice dialing on your phone must be turned on and voice tags stored) Please refer to
your phone's user guide for more information on voice control. (Note : Please refer to
the phone user guide for instructions on storing voice tags.)
1. Ensure that your headset is in standby mode by removing it from the multi-adapter.
2. Press the multi-function button on the headset – this puts the headset into active mode
and will establish a link between the multi-adapter and the headset. (The indicator lights
will flash every 3 seconds – you may also hear background noise as well.)
17