Finishing The Outdoor Unit Installation; To Finish The Outdoor Unit Installation; Starting Up The Outdoor Unit - Daikin altherma 3 R Instrucciones De Instalación

1N~ 50 Hz
220-240 V
a Interconnection cable
b Power supply cable
c Fuse
d Earth leakage circuit breaker
L N PWR
1 2 3
L N
3×
12 3
a Wire clamp
3 Reattach the switch box cover.
4 Optional: Attach the wire clamp (accessory) to the screw of the
refrigerant piping cover, and fix the cables to it with a cable tie.
5 Connect an earth leakage circuit breaker and fuse to the power
supply line.
ERGA04DAV37
Daikin Altherma 3 R
4P618926-1 – 2020.03
d
c
b
a
a
1×
1×

5 Starting up the outdoor unit

4.7 Finishing the outdoor unit
installation
4.7.1

To finish the outdoor unit installation

1 Insulate and fix the refrigerant piping and cables as follows:
d c
a
e
b
f
g
a Gas pipe
b Gas pipe insulation
c Interconnection cable
d Field wiring (if applicable)
e Liquid pipe
f Liquid pipe insulation
g Finishing tape
2 Install the service cover.
5 Starting up the outdoor unit
See the indoor unit installation manual for configuration and
commissioning of the system.
Installation manual
11