Technoline WS 6720 Manual De Instrucciones página 9

4. Then insert 2 x AAA batteries into the outdoor sensor. The outdoor temperature will be
displayed with "CH1" shown on the lower line of the LCD. Your Thermometer-clock will
be synchronized with outdoor sensor at Channel 1, the outdoor temperature will be
display.
Remarks:
Keep in mind that your outdoor sensor has a 30-meter open air transmission with no
obstructions. Actual transmission range will vary depending on what is in the path of the
signal. Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut
signal range in half.
TO SET CALENDAR, 12/24-HR TIME AND TIME
1. Press and hold SET / ALM SET for 2 seconds, time digits change to year "2008 YR"
and flash. Press
2. Then press SET / ALM SET once again, month digits flash. Press
month.
3. Then press SET / ALM SET once again, date digits flash. Press
date.
4. Press SET / ALM SET once again, time digits change "24 Hr", press
"12 Hr" time format or "24 Hr" time format. When "12 Hr" is selected, AM / PM icon will
be displayed.
5. Then press SET / ALM SET once again, time digits "0:00" show up and the hour digits
flash. Press
6. Then press SET / ALM SET once again, minute digits flash. Press
the minutes.
7. Press SET / ALM SET to return to normal mode, or it will return to normal mode in
around 7 seconds if no press of any other buttons.
TO SET ALARM TIME
1. Press SET / ALM SET once, time digits change to alarm time digits "AM 7:00 AL". Then
press and hold SET / ALM SET for 2 seconds, the hour digits flash. Press
your desired hours of alarm time.
2. Press SET / ALM SET again, alarm minute digits flash. Press
minutes.
3. Press SET / ALM SET again, time digits change to "05" and flash. Press
the snooze duration from 1 to 20 minutes.
4. Press SET / ALM SET to return to normal mode, or it will return to normal mode in
around 8 seconds if no further press of any other buttons.
To turn on or off your alarm
Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press
to turn on / off the daily alarm. When the alarm function is turned on, the
appears between the hour and minute digits.
To use snooze alarm
When time reaches your set alarm time, your clock will give beep sound to wake you up.
The icon will flash.
/ to set year.
/ to set the hours.
EN.3
/ button to set
/ button to set
/ to select
/ button to set
/ to set
/ to set alarm
/ to set
icon