Unpacking And Setting-Up The Printer; Connecting The Device; Connecting To The Power Supply - Weidmuller THM Plus S Manual Del Usuario

2.2 Unpacking and Setting-up
the Printer
1 Lift the label printer out of the box and set it up on
a level surface.
2 Check label printer for damage which may have
occurred during transport.
3 Check delivery for completeness.
Contents of Delivery
• Label Printer
• Power Cable Type E+F
• Ink ribbon
• Cardboard Core
• Operator's Manual
• DVD with software M-Print PRO
and documentation
• USB Cable
Please keep the original packaging in case
the printer must be returned.
When transporting the printer remove the
transfer ribbon and media.
NOTE
The device and printing materials will be
damaged by moisture and wetness.
Set up label printers only in dry locations
protected from splash water.
1357590000/00/03.12
2.3
, Windows driver
®
Fig. 4
1 Power switch
2 USB master ports for keyboard, scanner, memory
3 USB high-speed slave port
4 Ethernet 10/100 Base-T
5 Power connection jack
2.3.1
The printer is equipped with a wide area power unit
for a supply voltage of 100 V to 240 V.
1 Check that the device is switched off.
2 Plug the power cable into the power connection
3 Plug the power cable into a grounded socket.

Connecting the Device

Connections
stick or service key

Connecting to the Power Supply

jack (5).
Installation
1
2
3
4
5
29