Connecting To A Computer Or Computer Network; Switching On The Device - Weidmuller THM Plus S Manual Del Usuario

Installation
2.3.2 Connecting to a Computer or
Computer Network
NOTE
Inadequate or no grounding can cause
malfunctions during operations.
Ensure that all computers and ca-
bles connected to the label printer are
grounded.
1 Connect the label printer to a computer or net-
work by a suitable cable.
Details for installing the printer driver →
Printersetup.pdf
2.4

Switching on the Device

When all connections have been made:
1 Switch the printer on at the power switch (1).
The printer performs a system test, and then
shows the system status Ready in the display.
Wf an error occurs during the system test, the
symbol , Critical fault and type of error
are displayed.
Fig. 5 Power Switch
30
1
1357590000/00/03.12