Uline H-8094 Guia Del Usuario página 3

7. Insert new heating element by snapping prongs into
sockets. (See Figure 6)
Heating
Element
Prongs
Figure 6
8. Replace mica sleeve around new element.
(See Figure 7)
Figure 7
9. Cover with inner nozzle shield, ensuring edges of
heating element align with anchors inside of inner
nozzle shield. (See Figure 8)
Figure 8
PAGE 3 OF 9
HEATING ELEMENT REPLACEMENT CONTINUED
Anchors
10. Align openings on either side of inner nozzle shield
with screw holes in the body of the gun.
11. Replace outer nozzle shield. (See Figure 9)
12. Replace screws. (See Figure 9)
1-800-295-5510
uline.com
Figure 9
1121 IH-8094