Hanwha Techwin SBP-300NB Manual Del Usuario página 21

3. Remove the double-sided tap on the rear side of the gasket and affix it to the door.
Attach the wall mount to the door using the four M10 screws.
< Tighten each of the four screws a little at a time so that the wall mount is evenly pressed
to the gasket. >
• Use of SBP-300WM1/SBP-300WMW1 wall mount (with M10 x L20 screws)
• Use of SBP-300WM/SBP-300WMW wall mount (evenly securing the wall mount
inside the gasket groove as shown in the image below.) (with M10 x L12 screws)
GASKET
DOOR
GASKET
DOOR
GASKET
J Please assemble
the set in such a
way that the lock tab
faces down into the
slot in the installation
direction.
English _7