Package Contents; Part Description - Husky C301H Guía De Uso Y Cuidado

Package Contents

Become familiar with these controls before operating the unit (Figure 2)
E
N
M
H
J
Part Description
Auto(I)/Off(0) Switch: Turn this switch in the "Auto (I)" position to provide
A automatic power to the pressure switch and "Off (O)" to remove power at the end
of each use.
Pressure Switch: The pressure switch automatically starts the motor when the air
B tank pressure drops below the factory set "cut-in" pressure. It stops the motor when
the air tank pressure reaches the factory set "cut-out" pressure.
Safety Valve: If the pressure switch does not shut off the air compressor at its
"cut-out" pressure setting, the safety valve will protect against high pressure by
C
"popping out" at its factory set pressure (slightly higher than the pressure switch
"cut-out" setting).
Tank Pressure Gauge: The tank pressure gauge indicates the reserve air pressure
D
in the tank.
L
K
F
I
O
P
D
C
Q
7
Please contact 1-888-43-HUSKY for further assistance.
G
A
B
HUSKYTOOLS.COM