Samoa PM60 Serie Guía De Servicio Técnico Y Recambio página 5

REPAIR AND CLEANING PROCEDURE
LOWER SEALS KIT
For easier service, it is recommended to stop the pump near
the lowest stroke position.
1. Unscrew the tube (69) from the pump body (59).
2. Unscrew the piston (68) from the rod (49). Take away the ball (65)
and the washer (66). Replace the V-ring (67).
3. Unscrew bolts (60), remove the outlet body (59) and replace the
seals (58, 64) and guide ring (57).
4. Reassemble in reverse order, applying thread locker in all joints.
5. All these seals are included in the available kit 539302.
PARTS LIST / TECHNICAL DATA / DIMENSIONS
PAGE: 23, 28 and 29.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Fig. 5a Fig. 5b
60
Fig. 6
EN
49
LIPS
FACING
58
UP
57
59
64
65
66
LIPS
FACING
67
UP
68
69
R. 03/18 853 809 5