Pioneer XW-BTS5-k Manual De Instrucciones página 11

1. Press [INPUT] button to select Bluetooth mode. (Mode Indicator:
green).
2. Press and hold [PAIRING] button until you hear 2 consecutive "beep"
sounds. Then, the blue indicator on the top panel blinks quickly and
the unit will enter the pairing mode.
3. Switch on the Bluetooth wireless technology device that you want to
perform pairing with, place the device within 1 m of the system, and
set it to the pairing mode.
Pairing begins.
• In case of entering PIN code, use "0000".
( Only "0000" works for PIN code in this product. )
4. When Bluetooth wireless technology device has connected, the blue
indicator on the top panel will change from blinking to lit.
5. Start playback of music contents stored in Bluetooth wireless
technology device.
Connect the Latest Paired Bluetooth wireless technology Device
When the unit is switch on again to Bluetooth mode next time, it will be connected
automatically with equipment that has the latest connected device already.
Connect previous Paired Bluetooth Device
1. If you want to connect other paired device instead of the latest
paired one, please make sure the Bluetooth connection of the latest
device dis-connect. Then, the blue indicator on the top panel blinks
slowly and the unit will change the waiting for connection mode.
*Alternatively, there is also a way to switch the unit in pairing mode.
2. Switch on other paired device, and select this unit from this device
Bluetooth list.
3. Connection with other devices is successful, the blue indicator will
change from blinking to lit.
• Operating range of Bluetooth audio is up to 10 m (Measured in open space. Walls and
structures may affect range of device.)
Bluetooth Audio playback
11