Locking The Controls; Timer Control - Brandt BPV6210B Manual De Instrucciones

3.3.3

Locking the Controls

 You can lock the controls to prevent unintended use of the cooktop (for example children accidentally
turning the cooking zones on).
 You can also temporarily lock the controls for 30 seconds to facilitate the cleaning of the cooktop
(Clean Lock function).
 When the controls are locked, all the controls except the ON/OFF control are disabled.
Clean Lock function; Touch the lock
Touch and hold the lock control for 3 second
When the hob is in the lock mode, all the controls are disabled except the ON/OFF
always turn the ceramic hob off with the ON/OFF
first in the next operation.
3.3.4

Timer control

a) You can set a timer for one or more cooking zones. After the elapsed time you have set is up, the
cooking zone will turn off automatically.
b) You can also use the timer function as a minute minder . In this case, the independent timer will not
turn any cooking zone off after the set time is up.
• The time limit for the timer is 99 minutes.
To lock the controls
control briefly
To unlock the controls
Make sure the ceramic hob is turned on
Touch and hold the lock control for 3 second.
EN-13
The timer indicator will flash " Lo " for 30 second
unless pressing the lock control again.
The timer indicator will show " Lo "，After 10
seconds all indicators will show the original
settings. If you touch any other control whilst the
hob is locked, the timer indicator will flash " Lo "
for 10 seconds again.
control in an emergency, but you shall unlock the hob
control ,
you can