Setting The Clock And Timer; To Set The Clock; To Set The Timer - FULGOR 200 Serie Manual De Uso & Mantenimiento

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
The clock time will appear during all oven operations except when the timer or a timed cooking operation is
running.
The oven is preset to a 12-hour clock and indicates AM and PM.

To Set the Clock

1. Press [SET CLOCK]. The hours will begin flashing
and the display will show the CLOCK writing.
2. Press [+] or [-] to set the desired hour. Continue until
correct AM or PM is selected.
3. Press [SET CLOCK] again to confirm the hour and
minutes will start flashing.
4. Press [+] or [-] to set the desired minutes value, hold
the key to change by 10 minute steps.
5. Press [SET CLOCK] again to confirm the time or wait
for 5 seconds.
The following appears when edit mode is active to set or
change the value.
12

Setting the Clock and Timer

AM
.
Models SOVB - DOVB

To Set the Timer

1. Press [TIMER]. The timer and TIMER writing will
appear on the display.
2. Press [TIMER] again. The hours value will start
flashing.
3. Press [+] or [-] to set the desired hour.
4. Press [TIMER] again to confirm the hour and
minutes will start flashing.
5. Press [+] or [-] to set the desired minutes value,
hold the key to change by 10 minute steps.
6. Press [TIMER] again to confirm the value or wait
for 5 seconds.
7. TIMER will be steadily displayed.
8. When the time ends, reminder beeps will sound for
15 minutes or until the key is pressed.
9. Timer format is usually HR:MIN but it switches to
MIN:SEC during the last minute.
10. The displayed value is always rounded to the lower
minute.
Use & Care Manual
ENGLISH