Operation Of The Mincer; Operation And Handing; Before First Use; Rating Plate - CASO DESIGN FW2000 Manual Del Usuario

Ocultar thumbs Ver también para FW2000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67

17 Operation and Handing

16.3 Rating plate

17.1 Before first use

17.2 Operation of the mincer

it with your hand.
g) Place the hopper plate (6) as seen on illustration on the head
tube (7).
Do not block the air passage at the bottom.
The rating plate with the connection and performance data can be founded beneath the
device.
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
► Cool the head tube (7) vor using oft he device in the refrigerator or rinse it with cold
water, this will improve the processing.
Clean the device, see "cleaning".
Prepare the meat to pieces. Remove all bones, gristle, sinews. Do not use frozen meat.
Let frozen meat thaw completely.Enter the meat in the fillilng bowl. Slide the meat gently
with the pusher into the head tube. If you want to produce tartare, you should mince the
meat 2 times by using the medium cutting plade.
Caso Fleischwolf FW2000
Warning
Please note
e) Place the
cutting plate (10, 11
or 15) on blade (9)
and snake (8)
f) Place the fixing
ring (12) and tigthe
32

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2870

Tabla de contenido