Filling Instructions; Maintenance Instructions - Uline H-6067 Manual Del Usuario

FILLING INSTRUCTIONS

CAUTION! For dispenser to work properly, use
liquid soap only.
1. Remove lid.
2. Fill with appropriate soap and replace lid.
3. Priming the dispenser will take 6-10 strokes.

MAINTENANCE INSTRUCTIONS

It is important to clean and maintain dispenser on a
regular, scheduled basis. Failure to do so can result in
dispenser malfunction.
• Open dispenser. Flush tank and pump mechanism
with warm water to remove residue and
contaminates. Refill with new soap and replace lid.
(See Figure 4)
• Cleaning all touch-points on dispenser with a
disinfectant should be part of a regular cleaning
schedule. (See Figure 5)
• Periodically give the dispenser an overall cleaning.
All internal and external parts should be cleaned
thoroughly.
CAUTION! Never use abrasive cleaners when
cleaning soap dispensers.
PAGE 2 OF 6
FILLING
DISCLAIMER: Inappropriate soap use may result
in ineffective dispenser operation or clogging.
Soap containing any type of scrubbers will
cause the dispenser to leak or eventually fail.
MAINTENANCE
1-800-295-5510
uline.com
Figure 4 Figure 5
0421 IH-6067