Control Panel - Schumacher Electric SC-200A Manual Del Usuario

9. FEATURES
3
10. ASSEMBLY iNSTRUCTiONS
Remove all cord wraps and uncoil the cables prior to using the
battery charger.
11.

CONTROL PANEL

LEd indicators
CHECK (red) LEd lit: Indicates that the charger is not properly
connected to the battery.
CHECK (red) LED flashing: Indicates the charger is in abort mode.
CHARGiNG (yellow) LEd lit: Indicates the charger has detected a
battery and is charging it.
CHARGEd (green) LEd lit: Indicates the battery is fully charged and
the charger is in maintain mode.
NOTE: See the Operating Instructions section for a complete
description of the charger modes.
1. Amp/Volt Selector Switch
2. Battery Status LEDs
3. Battery Clamp Cable Assembly
4. Ring Terminal Cable Assembly
5. 12V Plug Cable Assembly
• 9 •
4
2
5
1