Monster dr.dre beats MH BTS-P OE BK EU Manual Del Usuario página 5

English
Connect
To connect your Beats Pro headphones, plug the straight 1/8-inch connector
™
(the end furthest from the coiled section of cable) into the port at the bottom
of the earcup of your choice and then twist it to lock it in. Both earcup sides
serve as an input, so pick the side that is most comfortable for you.
Plug the right-angle 1/8-inch connector into the audio output port on your
audio gear.
5
English
1/4-inch adaptor: If your audio gear uses a 1/4-inch
(6.3 mm) output port, use the included 1/4-inch adaptor
which is tethered to the 1/8-inch right-angle connector.
Please note that the adaptor and 1/8-inch jack are
threaded. To avoid stripping the treads, gently screw
on the adaptor without forcing. It should screw on
easily and will stop spinning when it's fully installed.
listen
Turn down the volume on your music player or gear
before putting on Beats Pro
Note the "L" and "R" markings above the inside of each
earcup. "L" is for the left ear. "R" is for the right ear.
L
headphones.
™
6