Aux / Optical / Coaxial / Hdmi Operation - Loewe klang bar5 mr Guía Completa Del Usuario

Loewe klang bar5 mr

Basic Operation | AUX / OPTICAL / COAXIAL / HDMI / Operation
9.5 Equalizer effect
Press the (Equalizer) button on the remote
control to select the desired pre-set equaliser effect:
OFF, SPEECH, CLASSICAL, POP, CUSTOM MUSIC,
CUSTOM FILM.
9.6 Bass/Treble Level
Press the bass +/- buttons on the remote control to
adjust bass level (BAS -12 ~ BAS +12).
Press the treble +/- buttons on the remote control to
adjust treble level (TRB -12 ~ TRB +12).
9.7 Surround Sound Mode
Experience immersive audio in surround mode.
Press the (Surround) button on the remote control
to change the surround mode.
9.8 Night Mode
Press the (Night) button on the remote control to
turn on/off night mode. This function ensures that there
is less range between quiet and loud sounds in movies.
Recommended for late night listening.
9.9 Display Brightness
If you do not press any button for 10 seconds, the
display will turn off automatically. Pressing any button
restores the brightest level.
9.10 Factory Reset
Resets the device to the default settings. In standby
mode, press and hold the button for 8 seconds.
"RESET" appears on the display and the device returns
to the original settings.
9.11 WDAL 2.0 control
Remove the rear flap of your soundbar before using the
WDAL 2.0 control keys.
Use these switches to connect additional external
wireless speakers via the WDAL2.0 as SUB / REAR /
FRONT / CENTRE channel. Set the switch to SMALL
for small speakers, LARGE for large speakers. To dis-
connect the speaker for a specific channel, set the
switch to OFF.
Connecting the subwoofer
The subwoofer provided is a WDAL 2.0 device. This
means that for the subwoofer to work, the WDAL 2.0
switch labelled SUB must be set to SMALL or LARGE.
Connecting another WDAL 2.0 device
You can wirelessly connect up to 6 additional speakers
that support WDAL 2.0 to the soundbar. To connect a
WDAL 2.0 compatible speaker to the soundbar, you
must:
1. Press the PAIRING button on the soundbar. To
access the PAIRING button, you must remove
the rear flap on the soundbar.
2. Press the PAIRING button on the WDAL 2.0
speaker.
21
3. Set the speaker role on the speaker itself. Op-
tions: Front left, Front right, Centre, Rear left,
Rear right.
4. Depending on the type of speaker, set the WDAL
2.0 switch corresponding to the selected speaker
role to SMALL or LARGE.
For details on setting the external speaker to pairing
mode, changing its role, and whether to select SMALL
or LARGE on the soundbar switch, please refer to the
user manual of the speaker.
Note: If you switch the WDAL 2.0 switch on the sound-
bar from OFF to another position, the soundbar spea-
kers of that channel will be turned off. So if you connect
the Front External Speakers via WDAL 2.0, the speakers
on the front channels of the soundbar will be turned off.
Volume offset
You can adjust the offset volume for external speakers
connected via WDAL 2.0. This is useful if the character
of your room does not allow the speakers to be evenly
distributed and some speakers are much closer to the
listener than others. You can adjust the overall volume
of each speaker individually:
1. Press and hold (Surround) button on the
remote control. FL appears on the soundbar
display.
2. Use / buttons to select a channel.
3. Use + / - button to change the volume offset of
the selected channel.
Display abbreviations explained:
FL – front left speaker
FR – front right speaker
SL – rear left speaker
SR – rear right speaker
SUB – subwoofer
CEN – centre speaker
10 AUX / OPTICAL /
COAXIAL / HDMI
Operation
Make sure the unit is connected to a TV or audio device.
1. Press (Source) button on the unit or remote
control repeatedly to select HDMI 1, HDMI 2, ARC,
OPT, AUX mode.
2. Control your TV/audio device directly for play-
back functions.
3. Press +/– button on the unit or remote control
to adjust the volume to desired level.
Note
• If the soundbar is in HDMI 1 / HDMI 2 / ARC / OPT
(Optical) mode and there is no sound output from
it, you may need to activate PCM or Dolby Digital
signal output on the source device (e.g. TV, DVD
or Blu-ray player).
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will be muted. This is not a defect.
Make sure the audio setting of the input source
connected via HDMI 1 / HDMI 2 / ARC / OPT
(optical) input is set to PCM or Dolby Digital. For
details on audio settings, refer to the user manual
of the input source device.
• In HDMI mode, when DOLBY ATMOS audio for-
mat playback starts, "DOLBY ATMOS" appears
on the audio panel display.
• When DOLBY DIGITAL audio playback starts,
if surround sound is turned on, the soundbar
display will display "DOLBY SURROUND". If sur-
round sound is turned off, it will display "DOLBY
AUDIO".
• When PCM audio format playback starts, "PCM
AUDIO" appears on the soundbar display.
• When entering non-PCM or DOLBY DIGITAL
audio formats, if there is no sound output from
the unit, "ERROR" appears on the display.