Bluetooth Operation; Usb Operation; Software Update; Spotify - Loewe klang bar5 mr Guía Completa Del Usuario

Loewe klang bar5 mr

Bluetooth Operation | USB Operation | Spotify | Software update
11

Bluetooth Operation

Connect the soundbar to a Bluetooth device (such as
an iPad, iPhone, iPod touch, Android phone, or laptop)
via Bluetooth, and then you can listen to audio files
stored on the device through the soundbar.
1. Press the (Source) button on the unit
or remote control repeatedly to switch
the soundbar to BT (Bluetooth) mode.
NO BT is displayed on the display panel.
2. Turn on Bluetooth on the Bluetooth device,
search for and select "Klang bar5 mr" to connect.
For information on enabling Bluetooth, see the
user guide of the Bluetooth device.
3. Wait until you hear the voice prompt from the
soundbar.
I f t h e s u c c e s s f u l l y c o n n e c t e d , B T
will appear on the display panel.
S e l e c t a n d p l a y a u d i o
music on your Bluetooth device.
I f a c a l l i s m a d e d u r i n g p l a y b a c k ,
t h e m u s i c p a u s e s . W h e n t h e c a l l i s
completed, playback resumes.
If your Bluetooth device supports AVRCP profile,
you can press / on the remote control
to skip a track or press
playback.
4. To exit Bluetooth, select another source.
When you switch back to Bluetooth mode,
the Bluetooth connection is re-established.
To connect the soundbar to another Bluetooth
device, press and hold the
on the remote control to disconnect the currently
connected Bluetooth device.
Note
• The minimum requirements for a Bluetooth
device are: Bluetooth profile A2DP, AVRCP and
Bluetooth version 4.2 + EDR
• The maximum operating range between the
soundbar and a Bluetooth device is approxima-
tely 10 meters.
• Compatibility with all Bluetooth devices is not
guaranteed.
• The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, a metal case covering the device,
or other devices in the vicinity that operate on
the same frequency.
12

USB Operation

Enjoy audio on a USB storage device, such as an MP3
player or USB flash memory, etc.
1. Insert the USB device.
2. Press
repeatedly to select the USB mode.
f i l e s o r 3. During playback, press
resume playback. Press
previous or next track.
Note
This product may not be compatible with certain types
of USB storage devices.
• If you use a USB extension cable, USB hub or
USB multifunctional card reader, the USB storage
to pause/resume
device may not be recognized.
• Do not remove the USB storage device while
reading files.
• The unit can support USB devices with up to 32
GB of memory.
• This unit can play MP3.
(Source) button
13

Spotify

Use your phone, tablet or computer as a remote control
for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses
found here:
www.spotify.com/connect/third-party-licenses
14

Software update

To upgrade soundbar firmware:
1. Download the latest software from the website.
2. Extract the file to the USB root folder.
3. Connect USB to the soundbar while in power-
on mode.
4. If the soundbar recognizes a new update file,
NEWSW will appear on the display.
5. The installation will then start.
6. When the installation of the new software is
completed, the soundbar restarts and the new
software version appears on the display.
(Source) on the unit or remote control
to start / pause /
/ to skip to the
To upgrade the multi-room function of your
soundbar:
1. Download and install the DTS Play-Fi app on your
mobile device.
2. Connect the soundbar to the app.
3. If new Play-Fi software is available, the application
notifies you.
4. Follow the instructions in the application to run
the multi-room feature update.
Warning: It may take a few minutes for the software
to update. Do not unplug your speaker, turn off the
device, or disconnect the USB stick or network during
the update. These actions can potentially destroy
your soundbar.
22