3M Peltor DECT COM Manual De Instrucciones página 7

charger the LED starts to flash slowly as long as
the charging process is active. When the battery is
fully charged the LED switches off.
2.7 HANDSET OUTSIDE THE AREA COVERED BY
THE DECT BASE UNIT:
If the handset moves outside the area covered by
the DECT BASE UNIT or loses contact with the base
unit, the LED on the handset lights constantly.
When you return to area covered, you will be out
of conference and LED is flashing (2 short flash
every 3 seconds). Connection to conference see
point 2.1
2.8 WARRANTY
The warranty
• covers any defects in the appliance resulting from
faults in material and/or workmanship
• do not cover damages due to normal wear or tear,
improper use or maintenance
• period is 24 months calculated from the end-users
date of invoice
Warranty claims is to be sent to the address below
together with proof of purchase/receipt and a
description of the fault.
Linnemann A/S
Landlystvej 1, Erritsö
DK-7000 FREDERICIA
Denmark