Intended Use - Eldom orbi BLN700 Manual De Instrucciones

PARTS
A. Cap
B. Handle
C. Small container
D. Large container
E. Grinding blade
F. Cutting blade
G. Seat
H. Base
SPECIFICATION
Power: 700 W
Power supply: 230 V ~ 50 Hz
Allowed uninterrupted operation:
2 minutes
pause before restarting operation:
30 seconds

INTENDED USE

The BLN700 Blender is dedicated for quick preparation of tasty and nourishing beverages, soups
and smoothies, etc. The handles (B) are used to turn the containers (C,D) into handy cups, and the
caps help store freshly prepared dishes.
fig. 2
• Turn the container (C,D) and set in the seat (G) (Fig. 3).
• Connect the device to the mains.
• The blender will start after pressing the container (C,D)
to the body. The device will run as long as the container
(C,D) is pressed. To lock the container in the seat (G), push
it down and turn clockwise. Turning the container (C,D)
counter clockwise and releasing pressure will unlock the
container.
OPERATING INSTRUCTION
fig. 1
E C
OPERATION
Before the first use, wash all parts of the blender that come into contact
with food: caps (A), containers (C,D) and blades (E,F).
The (E) blade is intended for grinding, e.g. coffee beans, sugar, etc.
Oilseeds (e.g. linseed) must not be ground.
The (F) blade is intended for cutting, e.g. fruit and soft vegetables.
Note. The (E,F) blades are sharp. The blades must not be fully immersed
in water. They should be thoroughly dried before installation.
• Put one of the containers (C,D) on flat, horizontal surface, with the opening
upwards and fill it with food products. Cut the products into small pieces. The
ingredients must not reach higher
than the maximum level marked
on the containers (C,D).
• Set one of the blades (E,F) on
the container (C,D), appropriate
for the processed products, and
turn (Fig. 2).
NUTRI BLENDER BLN700
D
F
H
A
fig. 3
EN
G
C B
D
H
•
EN 9