Zyxel PLA-400 Guia De Inicio Rapido página 3

1 Connecting the PLA-400 to a Cable/
DSL Modem or Router
1 Use an Ethernet cable to connect the LAN port on the
PLA-400 an available Ethernet LAN port of your modem,
router or switch.
2 Connect the PLA-400 into a power outlet.
3 The PWR LED should be on and the ETHN LED should be
on or blinking.
If none of the LEDs are on, unplug your device
and recheck your hardware connections.
ENGLISH
2