Section
09
Playing songs on iPod
List for the selected category is displayed.
3
Use MULTI-CONTROL to select a song,
album, artist or genre.
Turn to change the item; press to select.
List from the selected item is displayed.
# If you select Songs (songs), playback starts in-
stantly from the selected one.
4
Repeat step 3 to find a song you want
to listen to.
Selecting a playlist
You can select a playlist from your iPod.
1
Turn MULTI-CONTROL to switch to the
top menu of the list search.
# You can also perform this operation by press-
ing joystick on the remote control.
2
Use MULTI-CONTROL to select a
Playlists from among the categories.
Turn to change the category; press to select.
List from Playlists (playlists) is displayed.
3
Use MULTI-CONTROL to select a play-
list.
Turn to change the playlist; press to select.
Song list from the selected playlist is dis-
played.
# You can start playback throughout the se-
lected playlist by pressing and holding
MULTI-CONTROL.
4
Use MULTI-CONTROL to select a song
from the selected playlist.
Turn to change the song; press to play.
# If no songs have been stored in the playlist,
STOP is displayed and playback stops.
44
En
Displaying text
information on iPod
Text information recorded on the iPod can be
displayed.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play time— : album title and play time— :
song title and play time— : artist name and
play time— : artist name and
— : song title and
# If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Notes
! You can scroll the text information to the left
by pressing and holding DISPLAY.
! When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the Ever Scroll
on page 74.
: album title
: album title