Multi-Cd Player; Playing A Cd; Selecting A Track Directly - Pioneer EH-P88RSII Manual De Instrucciones

Reproductor de cd con receptor rds
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
08

Multi-CD Player

Playing a CD

You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Disc number indicator
Shows the number of the disc playing.
2 Track number indicator
Shows the number of the track playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1
Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis-
played.
2
Push MULTI-CONTROL up or down to
select a disc you want to listen to.
# You can also select a disc by using 1 to 6 but-
tons on the remote control.
! For discs 1 to 6, press the corresponding
button number.
! For discs 7 to 12, press and hold the corre-
sponding numbers, such as 1 for disc 7,
until the disc number appears in the dis-
play.
36
En
1 1 1 1
2 2 2 2
3 3 3
3
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4
To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Notes
! When multi-CD player completes preparatory
operations, Ready is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner's
manual.
! If there are no discs in the multi-CD player ma-
gazine, No Disc is displayed.
! When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, the disc and track
titles automatically begin to scroll in the dis-
play. Ever Scroll function is ON at the initial
setting, the disc and track titles scroll continu-
ously. About Ever Scroll, refer to Switching the
Ever Scroll on page 74.

Selecting a track directly

When using the remote control, you can select
a track directly by entering the desired track
number.
1
Press DIRECT.
Track number input display appears.
2
Press 0 to 9 buttons to enter the desired
track number.
# You can cancel the input number by pressing
CLEAR.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido