Setting Procedure - Baume & Mercier Promesse 10347 Manual Del Usuario

FUNCTION
Moon phase
Watches with a moon-phase complication display the cycles of the moon on their dial (first quarter, full
moon...). Moon phases are generally displayed using a moving disk which makes one rotation every
lunar month (29 ½ days).

SETTING PROCEDURE

Setting the moon phase
The setting of the moon phases on this watch does not have rapid correction and thus is accomplished
using the time setting.
1. Pull the crown to Position 2.
2. Turn the crown to advance the hands (A, B) clockwise. This also has the effect of rotating the moon-
phase disc (I) by jumps (one jump per day).
3. Continue to turn the crown to rotate the moon-phase disc of (I) by jumps until the full
moon appears in the center of the aperture.
4. Continue turning the crown in order to bring about as many jumps as days have passed since the
last full moon (consult a calendar).
5. Reset the crown to Position 1.
Setting the time
1. Pull the crown to Position 2.
2. Turn the crown to advance the hands (A, B) clockwise and position them at the desired time.
3. Reset the crown to Position 1.
Setting procedure – Quartz - hour, minute, moon phase
QUARTZ – HOUR, MINUTE, MOON PHASE
A : Hours hand
B : Minutes hand
I : Moon phase
4