General Safety Instructions; Special Product Features - LaserLiner SuperCross-Laser Compact Manual De Instrucciones

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
Compact cross-line laser with 2 laser lines
– Readily visible laser lines are outstanding for aligning tiles,
wall studding, windows, doors, etc
– Simple to use by virtue of its magnetic-dampened pendulum
system.
– Out-Of-Level: is indicated by optical signals when the unit
is outside ist self-levelling range.
– The slope-mode feature is an extra that permits gradients to be
laid out.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept
out of reach of children. Never intentionally aim the device at
people. This is a quality laser measuring device and is 100% factory
adjusted within the stated tolerance. For reasons of product liability,
we must also draw your attention to the following: Regularly check
the calibration before use, after transport and after extended periods
of storage. We also wish to point out that absolute calibration is
only possible in a specialist workshop. Calibration by yourself is only
approximate and the accuracy of the calibration will depend on the
care with which you proceed.

Special product features

Automatic alignment of the device with a magnetically
dampened pendulum system. The device is brought into initial
position and aligns itself autonomously.
Transport LOCK: The device is protected with a
pendelum lock during transport.
1H 1V
S
06
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10
Number and direction of the lasers
1H = 1 horizontal laser line
1V = 1 vertical laser line
S = Slopefunction