Beper P206VEN400 Manual Del Usuario página 9

EN
ensure that the section of the socket ca-
bles is suitable for your appliance power
absorption.
Never pull the supply cord to unplug the
appliance.
Make sure that the supply cord never co-
mes into contact with hot or cutting surfa-
ces
Do not use this appliance if the supply cord
is damaged. In case of damage, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
Only connect this appliance on alternating
current
Generally, the use adaptors multiple plugs
and/or extensions is not recommended;
should they be necessary, please use only
simple or multiple adaptors and extensions
in compliance with the safety rules in force,
making sure that the capacity absorption
limit marked on the simple adaptors and
the extensions and the maximum power li-
mit marked on the multiple adaptor are not
exceeded.This appliance is to be destined
to its special purpose only.
Any other use is to be considered as im-
proper and thus dangerous.
The manufacturer cannot be responsible
9