Saving One-Touch Dialling Numbers; Dialling With The One-Touch Dialling Buttons; Quick Dialling; Programming Quick Dial Buttons - Amplicomms BigTel 40 Plus Manual Del Usuario

Saving one-touch dialling numbers

1. Lift the receiver.
2. Press .
3. Enter the phone number (max. 24 digits) and press
4. Press the required one-touch dialling button (M1 - M6).
5. Replace the receiver. The entry is saved.

Dialling with the one-touch dialling buttons

1. Lift the receiver.
2. Press the required one-touch dialling button (M1 - M6).

Quick dialling

It is possible to store 10 phone numbers so
that they are dialled simply by pressing two
buttons (quick dialling).
NOTE:
You cannot delete the phone numbers
stored on the quick dial buttons.
Existing numbers are overwritten when
new phone numbers are stored.

Programming quick dial buttons

1. Lift the receiver.
2. Press .
3. Enter the phone number (max. 24 digits) and press
4. Enter the required memory location number (0 - 9).
5. Replace the receiver. The entry is saved.

Dialling using quick dial buttons

1. Lift the receiver.
2 .Press .
3. Enter the required memory location number (0 - 9).
4. The phone number stored is automatically dialled.
.
.
10

Increasing the receiver volume to +40 dB

The receiver volume can be increased to +40 dB by pressing the
button.

Setting the receiver volume

You can adjust the receiver volume using the rotary knob

Tone control

You can adjust the tone produced in the receiver using the slide control
on the right-hand side of the housing. The tone control only works when
the 40 dB amplification is activated.
Ringer volume
You can adjust the ringing volume using the slide control
right hand side of the housing.

Ringing tone

You can adjust the ringing tone using the slide control
hand side of the housing. There are 3 ringing tones for selection.

Sending loudness rating

You can increase or reduce the sending loudness rating for the micro-
phone in the receiver by means of the slide control
side of the housing.

PABX / Supplementary Services

R button on private branch exchanges

If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the manual provided with your private branch exchange.
The sales outlet where you purchased the exchange can provide
information as to whether the telephone will work properly with the
exchange.
.
on the right
on the right-hand
11
on the