Chain Dialling; Transfer An External Call Internally - Amplicomms PowerTel Manual De Instrucciones

Chain dialling

Use this feature to initiate a dialling sequence from numbers
stored in the phonebook, caller list or redial list whilst you
are on a call.
Selecting an entry from the phone book/caller list
1. Press the menu key whilst in a call
2. Select Phonebook or Caller ID log and press SELECT on the
corded phone or press
3. Select the desired entry and press CALL on the corded
phone or press
telephone number.
Selecting an entry from the redial list
1. Whilst in a call press
2. Select an entry using the arrow keys or by repeatedly
pressing
press
number.

Transfer an external call internally

While on an external call, you can transfer the call from the
cordless handset to the corded phone or vice-versa.
From the cordless handset to the corded phone
1. Whilst in a call press
If no additional cordless handsets are registered the corded
phone will ring right away. If there are several registered
cordless handsets, choose one and press
2. To answer the call on the corded phone, lift the receiver or
press
- or -
To answer the call on the cordless handset, press
or any dialing key.
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
on the cordless handset to dial the
or and press CALL on the corded phone or
on the cordless handset to dial the telephone
or any dialing key.
on the cordless handset.
or .
, select Transfer and press
or .
.
or
.
29