Using The Device - BaByliss PRO PerfectTwist BAB1100E Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
ENGLISH
PERFECTWIST
Braid maker
BAB1100E
BaBylissPRO's PerfecTwist is a
completely new hairstyling tool
that is very useful for twisting hair
quickly and easily. In a few easy
steps, create stylish curls, which
can be held in place later on with
hair ornaments or bands.
CHARACTERISTICS
• Battery casing (1)
• Tweezer/head rotation switch (2)
• Push buttons for raising the
tweezers (3)
• Tweezers (4)
A. INSERTING/REMOVING
THE BATTERIES
The battery casing is located in the
back of the device. Use a screw-
driver to remove the cover. Insert
2 alkaline AA batteries (type LR6)
aligned as shown on the inside of
the casing (Fig.1) and then close
the casing again (using alkaline
batteries guarantees improved
performance and a longer life for
your device). If the device should
stay unused for long periods or
should the batteries go flat, re-
move the batteries from the de-
vice. This will also help to prolong
their life.
B. USING THE DEVICE
• Choose a lock of hair to curl and
untangle it carefully.
• Part the lock into two strands.
• Press the button to raise the
tweezer (Fig.2). Place the end of
one of the two locks under the
tweezer and release the button
so that the lock is held firmly by
the tweezer.
• Do exactly the same to fix the
second lock under the other
tweezer.
• Line the device up with the
length of the strands of hair (Fig.
3). Hold the device slightly away
from your head and stretch out
the locks of hair.
• Turn the device on to position I.
The tweezers rotate, twisting the
locks (Fig.4).
• Once the locks have been twist-
ed and curled over their entire
length, return the device to posi-
tion 0.
• Line up the device as described
above. Turn the device on to po-
sition II. The device's head pivots,
twisting the two strands of hair
together (Fig. 5).
• Once the twisting action is fin-
ished, return the device to posi-
tion 0, and release the locks from
the tweezers by pressing the
push buttons.
• Place an elastic band or else an
attachment in the hair to hold
the curl in place.
• Repeat the operation for each
new curl.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido