Ezviz PT Serie Guia De Inicio Rapido página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Step 4
Link Romote Control or Detectors with Camera
1
Hold down the Reset button for 1 second.
Reset Button
2
When you hear the voice prompt, take the remote control or other detector close to the camera
and press any button on the remote control or the detector to send registration signal to the
camera.
Pull out the insulation sheet from the battery slot before you use the remote control.
You can link more detectors with the camera by following the steps above.
3
Press Reset button in the camera for 1 second to exit and finish the operation.
Within 50 cm
......
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C6t rfC6t

Tabla de contenido