Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Description on the function and operation
1.
In compliance with the safety precautions, the warm-air blower should be fixed 1.8
meters above the floor. Its power cord plug should be inserted into a power socket
with a rated current above 10A.
2.
Description of the control buttons.
1) The functions of the warm-air blower
A. The following 5 functional buttons can be found both on the machine panel and
on the remote controller:
1. "ON" button
2. "OFF" button
3. "POWER" button
4. "TIMER" button
5. "TURNING" button
B. Press the "ON" button to start the warm-air blower. The air flap will automatically
open and send out cold air.
C. Selections can be made between low power heating and high power heating. High
power heating, lower power heating and shutdown can be selected in sequence.
D. The function of automatic shutdown is available. The preset time can be incre-
mented by 1 hour each time, and the maximum time can reach 15 hours. Once the
preset time is up, the machine will automatically shut down.
ON
OFF
POWER
TIMER
SWING
–14–
E
N
G
L
I
S
H
Publicidad
Tabla de contenido
