Parts Identification - HJM 810 Instrucciones De Uso

PARTS IDENTIFICATION

ASSEMBLE
1. Unpack the Castor Wheels and Arc-shaped Brackets from the product
packaging.
2. Turn the radiator upside-down on a scratch-free and stable surface to
prevent damage to the paint finish or your floor surfacing.
3. Fit the two (2) Castor Wheels onto the radiator by placing the Arc-
shaped Brackets between the outermost fins on each side of the
radiator.
4. Securely fasten the two (2) Castor Wheels onto the radiator by
screwing two (2) Wing Nuts onto each Foot.
5. Turn the radiator in upright position after the Castor Wheel Assembly
fitted. For the correct upright position, please refer to fig. below
1. Handle
2. Switches.
3. Thermostat
4. Castor wheels
- 16 -