Tcp Calibration En; Sub-Assemblies: Accessories/Options En - Abicor Binzel TCS Compact Manual De Instrucciones

5 Functional description
5.3 TCP calibration
1
Welding torch
2 Welding wire
Abb. 7
TCP Kalibierung
NOTICE
• Calibration via the test tip is required if the welding torch is replaced or in the event of a collision.
5.4 Sub-assemblies: accessories/options
Prism
Reamer
Tab. 13 Accessories
Fixed connection
Flexible connection
Maintenance Unit
Tab. 14
Options
EN - 16
3
Test tip cover
4 Test tip
Anti-twist fastening with an M6x25 cylinder head screw in the clamping device (depending
on the diameter of the gas nozzle).
The reamer dimensions are determined by the gas nozzle and torch geometry for an
immersion depth of up to 50 mm. Available for all standard WH and robot torch versions.
Consists of a fixed connection inside the support.
Consists of a flexible connection outside the support.
ID 830.0075
Consists of a filter regulator and oiler
The maintenance unit removes solid particles from the compressed air and adds atomized oil
for lubrication of the pneumatically driven components.
1
2
3
4
5
5
Gas nozzle clamping device
BAL.0617.0 • 2021-05-20
TCS Compact