Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En; Product Description - Abicor Binzel BRS-LC Instructivo De Servicio

BRS-LC

1 Identification

The maintenance station BRS-LC is used in industry and in the trade for automatic cleaning of the gas nozzle
interior of MIG/MAG welding torches. The BRS-LC serves as a preventive measure to extend the service
lives of the torches and the maintenance intervals. The frame construction consists of cast aluminum which
includes the pneumatic valves. These operating instructions only describe the maintenance station BRS-LC.
The maintenance station BRS-LC may only be operated using original ABICOR BINZEL spare parts.
1.1 EU Declaration of Conformity
according to the EC Directive
Machinery Directive 2006/42/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction and in the present version, the product
described in these operating instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1
1.2 Responsibilities of the User
Within the EEA (European Economic Area), the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially Directive
(89/655/EEC) concerning the minimum safety and health requirements for the use of work equipment by
workers at work must be adhered to. In Germany, the Labor Protection Law and the Company Safety
Ordinance must be heeded. In addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (2004/108/EC) and that the signal utilisation of the integrated welding
current monitoring against stray currents is installed properly.

2 Product Description

2.1 Designated use

The maintenance station BRS-LC is designed for automatic use. It forms part of the welding system and may
only be operated in it. Designated use also includes the observance of the prescribed operating,
maintenance and servicing instructions.

2.2 Use contrary to the designated use

Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorised conversions or power increase modifications are not allowed.
Maintenance station BRS-LC
Machinery Directive 2006/42/EC
DIN EN ISO 12 100
Information regarding the EU Declaration of Conformity
1 Identification
EN - 2