Technical Data; Safety At The Workplace - Royal Catering RCVP-310 Manual De Instrucciones

Luft kehrt • Prüfen Sie, dass die obere und
zurück in den untere Dichtung nicht lose,
Beutel abgenutzt oder rissig sind
• Lebensmittel mit einem hohen
Flüssigkeitsgehalt können die
ordnungsgemäße Versiegelung
des Beutels verhindern. Schneiden
Sie den Beutel aus, wischen Sie
die Oberseite des Beutels ab
und versuchen Sie, ihn wieder zu
verschließen
• Prüfen Sie, ob der Beutel korrekt
installiert ist
• Achten Sie darauf, dass der
Beutel an der richtigen Stelle
platziert wird; wenn Sie den
Beutel selbst herstellen, achten
Sie darauf, dass das Ende des
abgeschnittenen Stücks auf dem
Versiegelungsstreifen liegt
• Stellen Sie sicher, dass
keine Flüssigkeit in den
Versiegelungsbereich des Beutels
gelangt ist
Der Beutel • Prüfen Sie, dass die obere und
versiegelt nicht untere Dichtung nicht lose,
abgenutzt oder rissig sind
• Lebensmittel mit einem hohen
Flüssigkeitsgehalt können die
ordnungsgemäße Versiegelung
des Beutels verhindern. Schneiden
Sie den Beutel aus, wischen Sie
die Oberseite des Beutels ab
und versuchen Sie, ihn wieder zu
verschließen
• Prüfen Sie, ob der Beutel korrekt
installiert ist
• Achten Sie darauf, dass der
Beutel an der richtigen Stelle
platziert wird; wenn Sie den
Beutel selbst herstellen, achten
Sie darauf, dass das Ende des
abgeschnittenen Stücks auf dem
Versiegelungsstreifen liegt
• Stellen Sie sicher, dass die
Schweißzeit lang genug ist
8
U S E R M A N U A L

TECHNICAL DATA

Parameter description
Product name
Model
Rated voltage [V~]/
Frequency [Hz]
Rated power [W]
Protection class
Protection rating IP
Vacuum degree [bar]
Max bag width [mm]
Dimensions [mm]
Weight [kg]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
Electric shock warning.
ATTENTION! Hot surface, risk of burns!
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
Rev. 06.07.2020 Rev. 06.07.2020
2. USAGE SAFETY
Parameter value
VACUUM PACKING
MACHINE
The terms „device" or „product" are used in the warnings
RCVP-310
and instructions to refer to VACUUM PACKING MACHINE.
Do not use in very humid environments. Prevent the device
230/50
from getting wet. Risk of electric shock! Do not cover air
inlets / outlets! Do not put your hands or other items inside
290
the device while it is in use!
I
2.1. ELECTRICAL SAFETY
a)
IPX0
-0,60
b)
310
c)
420x280x126
4,8
d)
using state-of-the-art technologies and
e)
f)
USER MANUAL.
g)

2.2. SAFETY AT THE WORKPLACE

a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The plug has to fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
Do not touch the device with wet or damp hands.
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust.
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
Use the device in a well-ventilated space.
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
9