Personal Safety; Device Description; Preparing For Use - Royal Catering RCVP-310 Manual De Instrucciones

k) Keep packaging elements and small assembly parts
in a place not available to children.
l) Keep the device away from children and animals.
m) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.

2.3. PERSONAL SAFETY

a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
e) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
f) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
g) Keep the device out of the reach of children.
h) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
i) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
10
j) Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
k) Do not move, adjust or rotate the device in the
course of work.
l) Do not leave this appliance unattended while it is in
use.
m) Clean the device regularly to prevent stubborn grime
from accumulating.
n) Do not work on two workpieces at the same time.
o) Do not cover the air intake and outlet.
p) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
q) Do not run the device when empty.
r) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
s) Keep the device away from sources of fire and heat.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for vacuum packaging of food by
suction of air. The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

B A
C
D
F E
A. Cover
B. Sealing strip
C. Locking latch
D. Top seal
E. Bottom seal
F. Sealing bar
Rev. 06.07.2020
CONTROL PANEL
Seal time + Increase welding time
Seal time - Reduce welding time
Function selection button up
Function selection button down
Vac time + Use this button to increase the air
suction time
Vac time- Use this button to reduce the air
suction time
Cancel/Off Use this button to cancel an ongoing
work process. Holding this button for
2 seconds will turn off the device.
Start/On Use this button to turn on the
welding machine and start the work
process.
VAC SEAL When the diode indicates „VAC SEAL",
it means that the device will suck air
and seal the bag.
SEAL ONLY When the diode indicates „SEAL
ONLY", it means that the device will
only seal the bag.
SPEED When the diode indicates "SPEED", it
means that the device will operate at
high speed. If the device is to operate
at a lower speed, press the "START"
button and the control diode will
go out.
PULSE VAC When the diode indicates „PULSE
VAC", the device will perform pulsed
vacuum suction.
CANISTER This function is used when the device
is connected to an external vacuum
container.
MARINATE This function is used during pickling
food in a vacuum container.
CAUTION! Welding time range: 1 - 15 seconds
CAUTION! Air suction time range: 0 ~ 80 seconds
CAUTION! Vacuum packaging is not a substitute for
cooling or freezing. All perishables requiring cooling or
freezing must still be frozen or cooled after being vacuum
packed.
Rev. 06.07.2020

3.2. PREPARING FOR USE

Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. Keep the product away from hot surfaces. The
device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
Disassemble the device and all its components and clean
them before the first use.
3.3. DEVICE USE
3.3.1. CREATING A CUSTOM SIZE VACUUM BAG
1. Cut the required amount from the roll so that it fits
the object plus 5 cm on each side.
2. Use scissors or a sharp knife to cut the edge of the
bag in a straight line.
3. Connect the power cord.
4. Open the cover.
5. Place one end of the cut bag on the sealing strip.
6. Close the cover.
7. Press the „ON" button to turn on the device. The
screen will light up.
8. Select the „SEAL ONLY" function and press the
„START" button. The machine will start sealing the
bag within the default time. The user can adjust
the welding time by pressing the „SEAL TIME +" or
„SEAL TIME -" button and then pressing the „START"
button.
9. The „SEAL TIME" indicator counts down to zero. After
counting down the time, the welding process stops
and the non-standard size bag is ready for further
vacuum welding.
3.3.2. VACUUM PACKING
1. Place the item in the ready bag. Leave 5 cm of free
space between the top edge of the bag and the
contents to allow welding.
2. Connect the power cord.
3. Open the cover.
4. Place the open end of the bag on the sealing strip.
5. Close the cover.
6. Select the „VAC ONLY" function and press the
„START" button. The machine will start welding within
the default time. The user can adjust the welding
time by pressing the „VAC TIME +" or „VAC TIME -"
button and then pressing the „START" button.
7. The „VAC TIME" indicator counts down to zero. After
the countdown, the welding process stops.
8. After the welding process is complete, you can open
the cover using the handle and remove the closed
bag.
CAUTION! The device requires a minimum of 20 seconds
between two welding operations.
11