Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrench Product Safety Information Manual
Form 04580361.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specifications
Drive
Models
Size
107XPA
3/8"
1077XPA
1/2"
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain con-
densate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly
sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose coupling with-
out internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects. See drawing
16571804-2 and table on page 2. Maintenance frequency is shown in a circular arrow and defined
as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
7. Coupling
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, de-
greased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80177587_ed3
Free
Recommended
Speed
Torque Range
rpm
ft-lbs (Nm)
160
10-45 (14-61)
160
10-45 (14-61)
8. Safety Air Fuse
9. Oil
10. Grease - Inject between ratchet housing and yoke to
lubricate drive bushing.
11. Grease - Disassemble ratchet head and lubricate
components.
12. Grease - Disassemble gearing and lubricate components.
Sound Level dB(A)
(ISO15744)
† Pressure (L
) ‡ Power (L
p
94.4
105.4
94.4
105.4
EN
Vibration Level
(ISO28927)
)
m/s²
w
<2.5
<2.5
EN-1