Recommendations For Use - Fimar MF/900 Uso Y Mantenimiento

RECOMMENDATIONS FOR USE

1 - Based on the type of process (defrost, cook, heat, etc.) suitably prepare food product
and place it in an appropriate container.
2 - Place the container on the centre of the cook plate.
3 - Press the button (A) to start the appliance.
4 - Press button (D) repeatedly until the indicator light for the required operating mode
turns on.
The last value set appears on the display (C).
5 - Press one of the buttons (F-G) to increase or decrease the value until the required
value is displayed.
6 - Rotate the button (E) and set processing time.
The indicator light (M) turns on and the last value set appears on the display (C).
7 - Press one of the buttons (F-G) to increase or decrease the value until the required
value is displayed.
When the food product reaches the right processing level, remove the container from
the appliance.
Caution - Precaution
To prevent burns, use suitable devices to pick up the container.
For first appliance use, remove any protective film lining and run at maximum tem-
perature (about 15 minutes) without food product to eliminate any unpleasant
odours. Wait until the appliance cools and, if odour persists, repeat the operation.
– Do not place any object in the cooking area especially not metallic objects (utensils,
watches, etc.) or objects that can be demagnetised (credit cards, ATM cards, etc.).
– If the appliance is not working correctly 8for example, does not turn on), do not remove
any part and do not attempt to repair it in any way. Contact your dealer or authorised
service centre.
– If the pyroceram plate breaks, turn off the appliance, disconnect the power cord and con-
tact your dealer or authorised service centre.
- 31 -
INDUCTION PLATES
English language
GB