Control Panel - KIWA TECHNOLOGY GOURMET 511 Manual De Instrucciones

Easy Series Ovens – Page 35
OVEN OPERATION Easy 6/10 – Easy GAS 6/10

Control panel

Timer (A)
With two operating positions, both indicated by the turning on of the chamber lamp,
and one of shut down O.
1st From position O, turn the knob counter-clockwise to the position .for operation.
∞
Infinite ( ).
In this position, the oven can be activated by setting the desired cooking temperature.
The oven will operate indefinitely until the switch off timer knob
is turned to position O. Turning the knob to position O a buzzer will chirp for approximately 10
seconds. You do not need to perform any maneuver to stop it.
2nd From position O, turn the knob counter-clockwise up to the value in minutes of the required
operating time and the oven starts the operation at the temperature set on the
thermostat. A beep will signal the end of the set time playing for about 10 seconds. You do not
need to perform any maneuver to stop it.
Thermostat (B)
Which regulates the temperature of the oven. Turning the knob changes the temperature from
0 to 270 ° C.
Steam adjustment (C)
That adjusts the percentage of steam injection
Turning the knob clockwise adjusts automatically from 0 to 100%
Turning the knob counterclockwise and placing it on 100%, the steam injection will be continuous
until it is positioned to 0 again so as to interrupt it, and this allows the manual management of the
steam from the user.
Fan speed button (D)
That regulates the fan speed from normal to reduced.
Burner lock light (E)
(Supplied with the gas models)
That indicates the burner lockout.
Thermostat light (F)
That indicates the operation of the heating elements. When the temperature is reached, the light
turns off, when the temperature drops below the set value, the light turns on again.
Burner Unlock Button (G)
(Supplied with the gas models)
Which restores the burner operation.