3
Connect the camera with the
battery pack inserted to the AC
Adaptor (supplied) using the USB
cable (supplied), and connect the
AC Adaptor to the wall outlet (wall
socket).
• The charge lamp will light up
when charging starts. When the
charge lamp turns off, charging is
completed.
Inserting a memory card into the camera
You can use CFexpress Type A memory cards and SD memory cards with this
camera.
Slot 1 supports CFexpress Type A memory cards and SD memory cards.
Slot 2 supports SD memory cards only.
Open the memory card cover. Then, insert the memory card into
Slot 1.
• In the default settings, images are recorded on the memory card in Slot 1.
• You can change which memory card slot to use by selecting MENU
(Shooting) [Media] [
[
Recording Media] or [
• Insert a CFexpress Type A memory card with the label facing the monitor,
and an SD memory card with the terminal facing the monitor. Insert the
card until it clicks into place.
Hint
• When you use a memory card with the camera for the first time, it is
recommended that you format the card on the camera for more stable
GB
4
performance of the memory card.
Slot 1 Slot 2
Rec. Media Settings]
Recording Media].
Charge lamp