Zipro Heat Manual De Uso página 38

Possible errors:
• Message '----', '----' – grip not used correctly.
• E-1 – no heart rate input signal detected.
• E-4 – FAT% and BMI below 5 or over 50.
PULSE RATE
ATTENTION! The heart rate is measured for sports purposes only (not for medical use).
• Put both your hands on the heart rate sensors on the handlebar. During the measurement,
the computer displays a heart icon.
• The computer displays the current heart rate after three to four seconds.
SETTING COUNTDOWN VALUES
• In the manual mode, select the parameter you want to base your training on: time, distance,
calories.
• The countdown values are set with the UP and DOWN buttons.
• The countdown starts when you press the START button.
COUNTDOWN PARAMETERS
• TIME: The time can be set from 5-99 minutes (one-minute steps).
•
CALORIES: The calories value can be set from 20-990 kcal (ten-kcal steps).
• DISTANCE: The distance value can be set from 1,0- 99,9 km (0,1 km steps).
MOBILE APP BLUETOOTH PAIRING
The computer is compatible with iConsole+ Training.
Start your training and enjoy new possibilities:
• Download the app.
• Enable Bluetooth on your mobile device.
• Start the app and select the ZIPRO device you want to pair.
•
When ZIPRO is connected with the app, the computer is turned off and the screen goes blank. From
now on, you control ZIPRO through your mobile device.
iOS compatibility: version 11.0 watchOS 4.2 or higher
iPhone, iPad, and iPod Touch compatibility
Android compatibility: version 5.0 or higher
Made for iPod, Made for iPhone, and Made for iPad mean the the electronic devices meet Apple
standards and were designed to communicate with iPod, iPhone, or iPad. Apple is not liable for the
operation of the devices. Use of the devices may affect the performance of the wireless network.
iPad, iPhone, iPod Classic, iPod Nano, iPod Shuffle, and iPod Touch are Apple Inc. trademarks
registered in the United States of America and many other countries.
EN
38