Ecolab 202580 Manual De Instrucciones página 62

Configuringa PROFIBUS-DP-System
File menu
The file menu can be opened by using the Alt-D key combination or by means of the left
mouse button. It provides the following options:
Fig. 6: File menu
New
Open
Save/ Save as
Diagnosis
Print preview
Print
Standard settings
End
1 The report contains additional information for programming the PLC
(e. g. data type of the selected parameters).
See
417102396 Rev. 1-10.2019
After the function for creating a new GSD file has been opened, the available
devices are selected. After the required device has been selected, all available
parameters are shown in the parameter window.
This function opens an existing GSD file.
This function is used to save the generated or edited GSD file.
This function can be used to test the GSD file in conjunction with
a PROFIBUS-DP master simulator from B+W and the Profibus slave.
Shows a preview of a report
1
Prints a report .
The language to be used at the next restart of the pro- gram can be selected
here.
Exits the program.
Ä Chapter 4.3.3 'Example report' on page 25.
1 that can be printed.
24