Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL TONGUE.
Join the tongue with the mast
aligning the holes as shown.
Assembly may be easier
by first installing tongue in
vehicle's hitch.
IF YOUR VEHICLE'S HITCH IS 1 1/4":
REMOVE THE 2" HITCH ADAPTER.
FOR 2" HITCHES: PROCEED TO NEXT STEP.
Remove the adapter
from the tongue.
TIGHTEN LOCKING KNOB.
NOTE: Lock must be in unlocked
position to tighten or loosen knob.
• Remove dirt guard.
• Turn key clockwise to unlock.
1034176D-2/15
Remove the screw from
the adapter using the
small hex wrench.
SECURE TONGUE.
• Install bolt and a flat
washer.
• Add a second washer,
attach nut.
• Use the large hex wrench
and closed wrench to
tighten completely.
INSERT TONGUE INTO
VEHICLE'S HITCH.
IF SPARE TIRE CAUSES
INTERFERENCE,
DO NOT USE THIS
PRODUCT!
Align the holes in the receiver
to the holes in the tongue.
Safety pin
is required
for use.
• Insert safety pin.
• TIghTEN knob until there is
no more play between the
tongue and receiver.
• Lock it.
• Replace dirt guard.
NOTE: When
locked, the knob
will spin freely,
making it unable
to be loosened.
Publicidad
