Descargar Imprimir esta página

Yakima DoubleDown ACE 2 Manual Del Usuario página 4

Ocultar thumbs Ver también para DoubleDown ACE 2:

Publicidad

Idiomas disponibles

Idiomas disponibles

STABILIZE THE BIKE FRAME IN THE
CRADLE.
Arrange
bikes for best
stabilization.
Pull straps
tightly over bike
frame, and hook
onto cradle.
FOLD MAST DOWN TO ACCESS THE REAR:
• Unload the bikes.
• hold mast and pull release knob upward.
• Fold mast down.
• When finished be sure to bring mast back
to the upright and locked position.
CAUTION: Keep fingers away from
ALL moving parts!
CAUTION: NEVER operate vehicle with DoubleDown ACE in folded position!
Check that release knob is in locked position by pulling on mast.
FOLD CARRIER ARMS WHEN NOT IN USE.
1034176D-4/15
The straps can be routed
under the cables.
PULL
Be sure arms
lock in down
position.
• Pull release lever
forward.
• Pull up slightly on arms
while pulling lever.
• Fold arms.
LOAD REMAINING BIKES.
Alternate bike
directions to avoid
interference.
Stabilize bike, secure
with straps.
• Use Long Strap to
secure bikes to mast.
• Use Wheel Strap to
secure rear bike's front
wheel to its frame.
• Secure loose strap end.
Mast
TO LOCK BIKES TO MAST
When loading 4 bikes,
frames may touch!
Never fold
down mast
with bikes
loaded.
USE LOCK CABLE.
• Access lock cable
from recess at rear
of mast.
• Pass cable through
bike frame.
• Attach lock to pin at
end of the arm.
• Lock the lock.

Publicidad

loading

Este manual también es adecuado para:

Doubledown ace 4Doubledown ace 5